We've had customers with your same 2018 Winnebago Minnie 170S confirm that the lift kit part # LC270682 is correct and that the axle configuration was a 3,500 diamond Lippert axle. This would be the kit you'd need to give you a lift of 3-1/2 inches. view full answer...
To know if the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 will fit your 2019 Winnebago Minnie Travel Trailer you'll need to measure the distance between the frame beams. If the measurement you get falls in the 22" - 66" range you will be able to install this hitch. This RV receiver hitch has a 5,000lbs GTW and 500lbs TW.
If the frame width is greater than 66" then we have the Adjustable Width Trailer Hitch Receiver for RVs # 13703 which has a frame width... view full answer...
The doorway width - the width from flange to flange of your doorway - needs to be between 23-3/4 inches and 26-1/4 inches, so yes, your 24 inch door will allow you to use the MORryde steps you asked about, which are the following part number:
- MORryde StepAbove RV Steps - 2 Steps # MR26RR
The only other thing you need to be sure of is the entry height (which is measured from the doorway threshold on your camper to the ground), as the # MR26RR is for entry heights measuring from 25 inches... view full answer...
Go To Results